New Brunswick Innova 43 Incubator Shaker
- EQUIPMENT DESCRIPTION
The New Brunswick Innova 43 Incubator Shaker is a large capacity floor mounted shaking instrument with an easy to use foot pedal door release so you can easily drop in your samples when your hands are full. This incubator shaker uses the Eppendorf triple eccentric counter balanced drive for high speed applications and heavy workloads. On top users will find a conveniently placed control panel for setting up programs, automated time based parameter changes such as speed and temperature. This microprocessor controlled incubator shaker can store up to 4 programs, each with 15 unique steps.
The New Brunswick Innova 43 Incubator Shaker can accept glassware up to 6 liters, and its large platform gives users increased flexibility as to the number and the size of the cultures they process. This incubator shaker also minimizes the need to open the lid thanks to a large triple pane insulated window and internal lighting. Should a user need to open the lid of this shaking instrument, rapid air circulation quickly recovers the temperature.
The New Brunswick Innova 43 Incubator Shaker has additional features such as a built in pluggable drain to humidify the chamber, reduce evaporation and capture spills, a protective spill cover above the drive, and a temperature offset to match the display to a reference point. Temperature can also be measure in either the flask or the chamber. This laboratory shaker comes with a variety of safety features such as an open lid cut off switch to stop the shaker when the chamber is opened, a thermostat fail-safe, and an acceleration and deceleration circuit to keep your shaker from starting or stopping suddenly, extending the life of the shaker. In the event of a power failure this incubator shaker uses non-volatile set point memory to keep studies running smoothly.
New Brunswick Innova 43 Incubator Shaker Specifications:
|5 °C above ambient to 80 °C|
|± 0.1 °C|
|± 0.1 °C at 37 °C|
|± 0.25 °C|
|2.5 cm (1 in)|
|2.5 cm orbit 25 - 500 rpm, ± 1 rpm|
|76 x 46 cm (30 x 18 in)|
88.3 x 56.2 x 48.8 cm (34.8 x 22.3 x 19.3 in) – Height measured from top of platform
|115.6 x 81.3 x 103.1 cm (45.5 x 20 x 40.6 in)|
|120 V 60 Hz|
- New Brunswick Innova 43 Incubator Shaker
- Flask Holders as seen in pictures
- 120V Power Cord
- Operator's Guide
- 30-Day Warranty
This New Brunswick Innova 43 Incubator Shaker works great and has been validated by our service team. Please note the top right side of the instrument has a small crack, but is just cosmetic. All of our lab equipment comes backed with our standard warranty. Should you have any questions, please don't hesitate to contact us.