Thermo Forma Series II 3110 Water Jacketed CO2 Incubator

Category:
Incubators
Manufacturer:
Thermo Scientific
Listing #:
THERMOFORMASERIESIICO2INCUBATOR-3437-3656-4335
Ships Within:
3 Business Days

REQUEST QUOTE

or Call 617-999-5746 for more information

"Want to sell your item like this one?"

  • EQUIPMENT DESCRIPTION
  • SPECIFICATIONS
  • INCLUDED
  • NOTES

The Thermo Scientific Forma Series II CO2 Incubator is the leading choice of R&D, biotech, academic and clinical labs worldwide, and with good reason. This water jacketed incubator offers precise control, recovery, stability and protection of your precious samples, maintaining temperature longer, and recovering faster than other technology out there.  The Thermo Scientific Forma Series II CO2 Incubator has many safe guards in place, such as triple wall construction, to guard against temperature drop in the event of a power outage, which can be useful in a lab where the power source isn’t completely reliable. Should you lose power, this laboratory co2 incubator will only drop 3°C (from 37°C to 36°C) in an hour and only 17°C in 10 hours, a marked improvement over air jacketed incubators.


The Thermo Scientific Forma Series II CO2 Incubator has a validatable HEPA air filtration to minimize the risk of airborne contaminates when opening and closing the chamber, giving you cleanroom-like class 100 air quality. The snap fit HEPA filter of this laboratory incubator can be easily changed without the use of tools and reports to a messaging center when replacement is needed. Air is filtered continuously and the entire co2 incubator chamber is refreshed every 60 seconds maintaining an aseptic culture environment. The Thermo Scientific Forma Series II CO2 Incubator is easy to clean with a polished stainless interior with coved corners, removable, autoclavable stainless steel shelves and removable inner door gasket. These shelves can be set as within this spacious 6.5 cu ft capacity. The heated dual pane inner glass door reduces condensation, and aids in the fast recovery times and responsiveness. 

Thermo Scientific Forma Series II CO2 Incubator Specifications:

Chamber MaterialPolished stainless-steel interior with coved corners
CO2 Concentration Range0 to 20%
CO2 Sensor TechnologyTC
Oxygen ControlNone
Relative HumidityAmbient to 95% at 37°C
Temperature Range (Metric)Ambient +5° to 55°C
Dimensions Exterior39.5 x 26 x 25in (110.3x 66x 63.5cm) 
Net Weight (English)265 lb.
Net Weight (Metric)120.2kg
Voltage115V
Amperage3.6A
Cabinet Material18-gauge, cold-rolled steel
CO2 Concentration Control

TC Sensor

Hertz

50/60Hz

Ports

Chamber thru-wall access port with filter

Shelf MaterialStainless-steel
Dimensions (D x W x H) Interior

20 x 21.3 x 26.8 in. (50.8 x 54.1 x 68.1cm)

Capacity6.5 cu.ft., 184L
Electrical Requirements

115V 50/60Hzr recovery characteristics with innovative, continuous contamination control technology.

  • Thermo Scientific Forma Series II 3110 CO2 Incubator
  • Shelves
  • Power Cord
  • Operator's Guide
  • 30-Day Warranty

This Thermo 3110 Incubator has been fully inspected and is performing to factory specifications. Our service team runs a full preventative maintenance on the instrument prior to listing on our site. This includes verifying temperature ranges, that the CO2 monitor is functioning properly, inspecting gaskets and chamber integrity and a decontamination. Instrument has been calibrated by our service team at 7% and 14% CO2 concentration running at 37°C.


When installing this 3110 Incubator make sure the unit is on a firm and level surface, and is located away from windows and doors, as well as heating or cooling ducts. There should be 3 inches of clearance around the incubator for unobstructed electrical and gas hook up, and proper ventilation. When filling the water jacket of the Thermo 3110, be sure to use unchlorinated water, as chlorine degrades stainless steel and can cause rust. For the best operation, when using the humidity pan, sterilized distilled, demineralized or deionized water with a resistance range of 50K to 1M Ohm/cm, or a conductivity range of 20.0 to 1.0 uS/cm is optimal.


We here at The Lab World Group are happy to answer any questions you may have about the Thermo Forma 3110 Incubator, so you get the most from your investment. Becoming familiar with the instrument, it’s optimal operation parameters, including its environment is key. We provide with each of our incubators the operators guide that should be reviewed carefully before you begin operation. All of the instruments we sell come backed by our standard 30-Day Warranty and ship out within three days of a completed sale order. If you have any questions about our Thermo 3110 or would like a quote from our sales team please don’t hesitate to contact us.

Other Incubators