Beckman Coulter Allegra X30R Refrigerated Centrifuge - Unused 2018

The Beckman Coulter Allegra X30R Refrigerated Centrifuge gives you high performance in an easy to operate and space saving design. The high speeds top out at 18000 RPM, with a maximum g force of 29765 x g when using a fixed angle rotor. This unit can accommodate volumes of up to 400 mL, and has a temperature range of between -20°C to 40°C adjustable in 1°C increments. The system is an ideal choice for labs dealing in general research, or sample preparation, and features quick runs and simple set ups and at only 18” wide, this benchtop centrifuge won’t take up too much bench. With a noise output of <68 dba it shouldn’t distract you either.  

The Beckman Allegra X30R uses a reliable brushless induction drive, and features 10 acceleration and deceleration profiles as well as storing up to 20 user defined profiles. The automatic rotor detection system of this Beckman centrifuge helps make sure your parameters are correcting before running. This benchtop centrifuge can maintain temperatures for up to 10 minutes after the completion of a run, alerting you to the completion with an audible tone, and giving you time to collect your samples.

Beckman Coulter Allegra X30R Specifications:

• 2018 Beckman Allegra X30R  | CAT# B06320 | Unused Scratch & Dent | MSRP: $14,887.73
• SX241.5 Swing Rotor with Lid (24 x 2ml)
• Beckman Allegra User Manual 
• Rotor Key
• 120V Power Cord (12A)
• 30-Day Warranty
• Please Note: This listing for an unused benchtop centrifuge that's been fully tested by our service team with a clean bill of health.  The rotor that's included is slightly used and was tested to ensure it was performing at factory specification.  Centrifuge ships within 1-3 business days.

Every piece of lab equipment that enters The Lab World Group receives a full preventative maintenance and quality control before being listed for sale. This ensures that all items ship within 1 to 3 days once your order is placed and that the lab equipment you receive is in pristine condition.

The first step is receiving the laboratory equipment into our facility. At that point regardless of the unit’s origin they are instantly decontaminated using both simple green and isopropyl alcohol. For the next step, the laboratory instruments are then entered into our inventory system where each piece of equipment receives its own tracking ID and history.  The inventory management is a large part of our system ensuring each piece of equipment receives the appropriate care as well as for any consigned pieces our customers have perfect tracking of their assets.

The maintenance of the centrifuges, analyzers, incubators, etc are all unique to their functions in the lab. The preventive maintenance process for an analyzer is vastly different than an incubator or lab refrigerator. One of the major differences with The Lab World Group is we service all our own laboratory equipment and are experts in servicing everything from a vortexer to a Chromatography System.  

The First step we undertake when testing your centrifuge is the same regardless of whether is refrigerated, a benchtop or ultra-centrifuge. We ensure the centrifuge is properly balanced on the floor. Next, we check the rotor for any chips or defects and weigh the buckets for appropriate weight. The key to properly running any centrifuge is to ensure the unit is always balanced both internal and external. 

Next, we then check the unit for physical defects and worn parts such as missing drip pans, dings and dents, gas lid struts, LCD screens, centrifuge seals, rotor seals, lid locking mechanisms, etc. We then open the centrifuge and perform a full preventive maintenance on the unit. This includes lubricating and greasing any gears, parts, and mechanisms. The electronic boards are reviewed for defective or expiring electronic parts such as transistors or capacitors.

We then install the rotor and buckets and run the centrifuge at a low rpm to ensure it is balanced and running properly. Using a tachometer, we then calibrate the centrifuge at a low speed to ensure accuracy. After calibration of the centrifuge we then run it through continued testing. We test the unit for 20 minutes, 40 minutes and 60-minute cycles at various speeds. The various rcf and rpm tests allow us to test that low-speed calibration is holding at high centrifugation speeds.

Next the unit is given a secondary cleaning and decontamination. At that point we picture and video the unit to show you the exact centrifuge that you will be receiving including the specific rotor buckets and inserts. This ensures that once you order the centrifuge it can easily pass its additional outbound quality control and be shipped within 1 -3 days.