Please scroll to the bottom of the screen for similar items or feel free to browse our sight.
We do the best to keep all of our inventory up to date online and are proud to be one of the few lab companies that keep an accurate inventory and list actual items we have in stock
Binder FD115 Drying Oven - 75783-006 - Unused Model
Incubators - Lab Oven
- EQUIPMENT DESCRIPTION
The Binder FD 115 Incubator Oven brings you rapid heat up, superior temperature uniformity and energy conservation for a heating and drying solution you can rely on. This Binder Oven has forced air convection for rapid heat up and recovery times. This lab oven has a temperature range from 10°C above ambient to 300°C with a stability of ± 0.3 It only takes this laboratory oven 18 minutes to reach 300°C and can recover that temperature in 4 minutes after an opening. This incubator has a 116L/ 4 cu.ft. interior that comes with chrome plated racks capable of holding 66 lbs. each.
The Binder FD 115 Oven uses digital control and the APT line technology to ensure accurate heating throughout the instrument. Additionally, this drying oven electromechanically controls of the exhaust airflap for safety. The Binder FD115 features class 2 integrated adjustable temperature monitor with a visual alarm to alert users to deviations from set points and a USB port for exporting data.
Binder FD 115 Lab Oven Specifications:
4.1 cu ft / 116L
Wall clearance, rear
Wall clearance, side
Max Load Per Rack
66 lbs (30kg)
331 lbs (150kg)
10° above amibent-300°C
Temperature variation at 150 °C [± K]
Temperature fluctuation at 150 °C (± K)
Warm-up time to 150 °C
Recovery time after doors were open for 30 sec. at 150°C (
115v, 50/60 Hz, 11.7A, 1.40kW
- Binder Drying Forced Air Incubator | MSRP: $3450.92 | Unused
- Shelves with Brackets
- Incubator User Manual
- 120V Power Cord
- Temp. Validation Report
- 30-Day Warranty
- Please note: This is an Unused, Scratch & Dent Model that's been fully tested with a clean bill of health by our service team.
This Binder Drying Forced Air Oven has been fully inspected and is operating without issue. All of our lab equipment comes backed with our standard warranty. Should you have any questions, please don't hesitate to contact us.