Biogenics Crysalys PTC-9500 Cryo Process Management System

Listing #:
Ships Within:
3 Business Days


or Call 617-999-5746 for more information

"Want to sell your item like this one?"


The Biogenics Crysalys PTC-9500 Cryo Process Management System offers touch screen convenience with precise and accurate control. This cryocontroller allows users to archive and datalog, view realtime temperature graphs and digital data, set alarms, and perform controlled rate thawing all from a user friendly, 5.7” full color touch-screen graphic interface. The PTC-9500 will store up to 16 user protocols, each with up to 100 steps. This Portable Cryo Management System controls the rate of cooling and thawing at 0.1°C/min with a controlled range of +50°C and -196°.

The Biogenics Crysalys PTC-9500 Cryo Process Management System uses a proportional DC, steady-state current to regulate chamber temperature, with a targeted PID control to avoid possible EMF interference with samples. This cryocontroller goes further to protect samples with an internal, lithium-ferrous battery to guard against power interruptions for up to four hours. This unit can even be used with a 12 VDC auxiliary input from an automobile power system. In addition, this Portable Cryo Management System time stamps for every program run onto an onboard SD card, at a sample rate of at 10 per second, recording every 6 seconds. All of this information is accessible from the connected Windows computer with Crysalys Cryolink software. This system is also partnered with a DX2.5 LN2 cryobath, with an extra tall cryochamber lid, built to accommodate cryovial canes.

Biogenics  Cryocontroller PTC-9500 Specifications:

Controlled temperature range Between

+50°C and -196°C

Monitoring and recording range

Between +200°C and -200°C

Thermometry system

Platinum RTD (4 wire)

Temperature warning (onscreen or sound)

User-Definable from ±1.0°C to ±3.0°C

Temperature display & User Interface

5.7" Color TFT LCD Touch screen

Temperature Control Resolution (A/D Conversion)



Digital, quartz crystal

Minimum Ramp Rate


Data Logging


Temperature range

Between +200°C and -200°C

Temperature resolution


Sampling rate

10 per second

Recording rate

10 per minute (every six seconds)

Internal Protocols (User-Programmable)


Maximum number of internal programs


Maximum steps or ramps per protocol


Minimum temperature step size


Programs with Computer


Continuous LN2 consumption

Less than 1 liter per hour (based on cryochamber design)

Safe operating temperature range

+40°C to 0°C

Safe storage temperature range

+50°C to -10°C



Dimensions (WxDxH)

8” x 13” x 7”


7 lbs


90-264V, 47 to 63Hz, 60W

  • PTC-9500 Touch Screen CryoController
  • DX2.5 LN2 CyroBath
  • VHC Cryochamber
  • Windows 7 Notebook Running Cryolink Software
  • 115V Power Cord
  • Operator's Guide
  • 30-Day Warranty
  • Instrument has been fully tested by our service team with a clean bill of health.  Once buyer receives the instrument, they'll need to re-calibrate the instrument on their bench.  

This Cryocontroller PTC-9500 has been fully tested by our service team with a clean bill of health. Once buyer receives the instrument, re-calibrate the instrument on the bench will be neccesary. All of our lab equipment comes backed with our standard warranty. Should you have any questions, please don't hesitate to contact us.  

Other Cryogenics