Biotage Turbovap 96 Solvent Evaporator System

Other Misc Lab Items
Listing #:
Ships Within:
3 Business Days


or Call 617-999-5746 for more information

"Want to sell your item like this one?"


The Biotage Turbovap 96 is a concentration evaporator workstation used to process multiple samples within a 96 well microplate.   This solvent evaporation system was built on the original Zymark Turbovap platform and later acquired by Biotage.  This system is designed to work with two 96 well microplate simultaneously, while providing Biotage’s patented gas vortex allowing for efficient solvent evaporation. Solvent Evaporator systems have been a staple in drug discovery along with analytical chemistry for the past three decades.  The unique nozzle design of the Biotage Turbovap guarantees fast shearing evaporation.  The system supports several different plates and depths, including deep-well microplates. 

Built into the side of the Turbovap Evaporator is a dual gas regulator used for one, or both pates and can be operated individually, or at the same time. The Biotage Turbovap 96 can accommodate 1ml, or 2ml plates while monitoring the flow rate of the gas which is determined by the volume of solvent within the sample plate.  Temperature controls can be manually adjusted to increase solvent evaporation.  The OEM recommends using a solvent evaporation guide to learn the values of each solvent before use.  The Easy to use controls also allow you to adjust time along with temperature for both compartments.  Contact us today to learn more about our Biotage TurboVap Solvent Evaporator System.

Evaporation Rates:

solventsolvent volume (uL)heater temp. (°C)Gas flow rate (cubic ft/hr.)time to evap. to dryness3
Methanol500706012 min.
Water500806070 min
Acetonitrile500706025 min.
Acetonitrile/water (50:50)100050701.75 hours
THF (Tetrahydrofuran)1000505010-15 min.
DMF (Dimethylformamide100807050 min.
DMSO (Dimethyl sulfoxide)25070603 hours

number of samples2 x 96 well plates, standard or deep with adapters
Format8 x 12 well microplates and deep-well plates
timer range1 to 99 minutes
max. sample volume<2 mL
capacity2 standards 96 well microplates or deep-well plates

Two internal individually controlled heaters. Each

adjustable from ambient to 80±5 °C

Gas supply


Minimum inlet pressure 30 psi (2.1 bar)

Maximum inlet pressure 80 psi (5.5 bar)
exhaust25 CFM blower with 5.1 cm (2") venting exhaust

minimum operating

70 psi
range5–99 cfm
Power100-120V 50/60Hz | 220-240V 50/60Hz
Dimensions22” x 13” x 12”
Weight48 lbs

  • Biotage Turbovap 96 Catalog # 103263/05
  • Two 96 Well Nozzle Lids 
  • 115V Power
  • Operator's Manual
  • Warranty

The Biotage Turbovap solvent evaporator system has been fully tested and validated by our service team.  System has a clean bill of health and is in like new condition.  If you have any questions about our used lab equipment listings don't hesitate to contact us.

Other SpeedVac and Vapor Traps