VWR Multi-Tube Vortexer 945057
- EQUIPMENT DESCRIPTION
The VWR Multi-Tube Vortexer 945057 is built to use multiple test tubes, vitals, or cylinders. The vortex process occurs by locking the vessel in place as the bottom orbits 3.6mm. The standard multi-tube vortexer by VWR has two stainless steel posts that grasp the support plate securely in order to prevent noiseless mixing. Loosening knobs and moving the plate up and down will adjust the support plate. The VWR Scientific Multi-tube vortexer contains a circular groove around the top of the larger post, which grants the support plate access to swing aside for easy discharge of samples. VWR’s multi-tube vortexer provides suction-cup feet that eliminate sliding and is built of rugged stainless steel with paint that will not corrode. It is also armed with a vigorous, perpetual magnet motor with sealed ball bearings.
The Motor on the VWR’s standard Multi-tube vortexer is established for consistent duty. These standard Multi-tube vortexers by VWR Scientific provides adjustable speeds that range from 500-2500 rpm and allows simple repeat procedures to occur by an adjustable automatic timer. The VWR Scientific model provides a main power switch and knobs for the adjustments of multiple modes on the front panel. VWR Scientific is one of the most reliable and trusted names in the industry. The VWR standard multi-tube vortexer comes from a long line of reliable vortexes built from a name you can trust.
VWR Multi-Tube Vortexer Specifications:
1-9999 Minutes, Continuous, Pulse
500-2500rpm, set in 25 rpm
3.6 mm Eccentric Orbit
15 x 9 x 16
120V, 50/60 Hz, 100W
- VWR Multi Tube Vortexer | CAT # 945057| MSRP: $3,1950.59
- 115V Power Cord
- 30-Day Warranty
This VWR Multi Tube Vortexer has been fully inspected and is operating without issue. All of our lab equipment comes backed with our standard warranty. Should you have any questions, please don't hesitate to contact us.