- Description
- Specifications
- Included
- Notes
- Video
Description
Description
PHCBI MCO-170ACL-PA C02 Incubator
This Phcbi incubator offers passive contamination control, digital programming, and precise CO2 management. This lab incubator uses Incu-Safe surfaces, and copper-infused stainless steel giving you the germicidal properties of copper with the easy maintenance of stainless steel. In addition, the Cytogrow incubator incorporates a SafeCell UV lamp to eliminate contaminates when the door is opened and closed without affecting cell cultures.
The thermal conductor CO2 sensor provides precise CO2 control with automated delivery for reliable and repeatable results. The CO2 levels can be set between 0-20% from the indoor command center. On the cell incubator display, users will find information for both CO2 and temperature, showing both the setpoint and current conditions. The temperature range can be set between +5°C over ambient to 50°C
The Cytogrow incubator’s interior has an overall volume of 5.8 cu. ft. (165L), and features easy-to-adjust perforated shelving, an access port at the back of the laboratory incubator is for additional instrumentation, and a direct heat system with air jacket insulation. The cell incubator has perforated shelving to promote temperature and gas circulation and uniformity throughout. The interior also features the innovative dew stick, a Peltier-powered probe that draws condensation away from the inner door and surfaces and channels it back to the humidity reservoir to trap contamination before it can destroy a cell culture. Thus, making this cell culture incubator a great choice to have in the lab.
Specifications
Specifications
MCO-170ACL-PA C02 Incubator Specifications:
| Interior Volume | 5.8 Cu.Ft. (165 L) |
| Interior Dimensions | 18x17x25″ |
| Access Port | 1: back side (1.2″ (30 Mm) Diameter) |
| Temperature Control Range | Ambient temperature +º5C to +50ºC |
| Temperature Uniformity | ±0.25ºC (ambient temperature: 25ºC, setting: 37ºC, CO2: 5 %, no load) |
| Co2 Control Range | 0% to 20% |
| Co2 Controller | Microcomputer, Input by keypad |
| Co2 Gas Connection | 0.157 Inch To 0.36 Inch (4 Mm To 6 Mm) Diameter Tube Can Be Connected |
| Co2 Gas Pressure | 0.03 Mpa(G) (0.3kgf/Cm2(G),4.3 Psi(G)) |
| Co2 Variation | ±0.15% (ambient temperature: 25ºC, setting: 37ºC, CO2: 5%; no load) |
| Co2 Sensor Type | Thermal Conductivity |
| Contamination Controls | InCu-SaFe copper enriched stainless steel interior and shelves |
| Humidifying System | Natural Evaporation With Humidifying Pan, 95 %R.H.±5 %R.H. |
| Exterior Dimensions | 25x30x36 in |
| Weight | 320 lbs |
| Power | 110-120V, 60 Hz |
Included
Included
Included with PHCBI C02 Incubator
2023 PHCBI Incubator CytoGrow CO2 | CAT# MCO-170ACL-PA | Unused Scratch & Dent | MSRP: $7874.19
Temperature Validation Report
Shelves with Hardware
User Manual
120V Power Cord (3A)
30-Day Warranty
Please Note: Orange datalogger seen in photos is not included. This is our testing tool to demonstrate a fully working system.
Notes
Notes
Technical Notes on the CO2 Incubator
This listing is for an unused scratch and dent model. This cell culture incubator comes fully tested and calibrated with a clean bill of health. Orange data-logger and CO2 Cylinder with the regulator are not included. This is our testing equipment to demonstrate a fully working system. All of our lab equipment comes backed by our standard warranty. Should you have any questions, please don’t hesitate to contact us.
Video
Video
PHCBI MCO-170ACL-PA C02 Incubator Video
PHCBI Incubator CytoGrow - 2023 Unused ID 17995
