Biotek Synergy MX Plate Reader | SMAD
Microplate Readers
Bio-tek
Microplate Readers Price
- EQUIPMENT DESCRIPTION
- SPECIFICATIONS
- INCLUDED
- NOTES
The BioTek Synergy MX Plate Reader brings you modular multimode convenience with superior accuracy normally found in systems dedicated to one mode. The ultra-fine-tuned performance of this microplate reader features incubation to 65°C, UV Absorbance with xenon flash lamp, and a dual reagent dispenser. The four-slit set up on the excitation and emission side gives you 16 bandpass combinations to choose from for every wavelength paring.
The BioTek Synergy MX Plate Reader SMAD has an automated Z height adjustment, that accommodates different microplate heights with 100 μm resolution. This multi-detection microplate reader also has shaking and 4 zone temperature control, that incubates up to 65°C. That coupled with Gen5 Software for analysis of your data gives you a multi-mode microplate reader no matter how your needs evolve.
BioTek Synergy MX Plate Reader SMAD Specifications:
Dimensions | 18x18x15" |
Weight | 65lbs |
Microplate types: | 1- to 384-well plates |
Temperature control: | 4°C above ambient to 65°C ± 0.5°C at 37°C |
Shaking: | Yes |
Top optics adjustment: | Yes, 100 μm resolution |
BioStack Compatible (Automation-Ready): | Yes |
Software: | Gen5 Data Analysis Software |
Absorbance | |
Light source: | High Energy Xenon Flash Lamp |
Wavelength selection: | Double grating monochromator |
Wavelength range: | 230 - 999 nm, 1 nm increment |
Bandwidth: | 2 nm (230-285 nm), 4 nm (>285 nm) |
Measurement range: | 0 - 4.0 OD |
Resolution: | 0.0001 OD |
Pathlength correction: | Yes |
OD accuracy: | < 1% at 2.0 OD typical |
OD repeatability: | < 0.5% at 2.0 OD typical |
Dispensers | |
Number: | 2 syringe pumps |
Dispense volume: | 5 - 1000 μL in 1 μL increment |
Dead volume: | 1.1 mL, 100 μL with back flush |
Plate geometry: | Syringe 1: 6- to 384-well microplates Syringe 2: 6- to 96-well microplates |
Dispense Precision: | < 2% at 50-200 μL |
Dispense Accuracy: | ± 1 μL or 2% |
Speed (minimum kinetic interval) | 96 well: 11 seconds 384 well: 22 seconds |
- Biotek Synergy MX | CAT# SMAD
- Laptop with Gen5 Software
- Absorbance Validation Report
- Reagent Dispenser
- User Manual
- 120V Power Cord
- 30-Day Warranty
This system has been fully inspected and comes with a current absorbance validation reprot. All of our lab equipment comes backed by our standard warranty. Should you have any questions, please don't hesitate to contact us.