11 item
IKA Reciprocating Shaker HS 501 Unused Still in Box
- Description
- Specifications
- Included
- Notes
- Video
Description
Description
IKA Reciprocating Shaker HS 501
The IKA Reciprocating Shaker HS 501 is an advanced-performing horizontal shaker that provides efficiency and a user-friendly experience that’s ideal for lying vessels. This laboratory shaker features a simple-to-use digital display and controls that allow you to set a timer function and an infinitely variable speed between 0 to 300 RPM. With this IKA shaker, you can run operations continuously (endless), even under heavy loads, on a platform with an orbital diameter of 30 mm. This lab shaker also features a USB interface where users can document all data parameters using the IKA’s LabWorldSoft software and install important firmware updates. Users can run operations inside incubators with this lab shaker with ambient temperatures between 5 – 50 °C. In the event of power failure, the unit will automatically resume operations once power is restored.
Specifications
Specifications
IKA Reciprocating Shaker HS 501 Specifications:
Speed | 0 – 300 RPM |
Orbit | 30 mm |
Platform Dimensions (needs one) | 17.5×17.5 in |
Dimensions | 20x24x26 in |
Permissible relative humidity | 80 % |
Permissible ambient temperature | 5 – 50 °C |
Time setting range | 1 – 55 min |
Operating mode | timer and continuous operation |
Weight | 90 lbs |
Power | 115 V, 50/60 Hz |
Fuse | 2x T4A |
Included
Included
Included with IKA Reciprocating Lab Shaker HS 501
- 2021 IKA Reciprocating Shaker | CAT# HS501DS001 | Unused Still in Box | MSRP: $3716.00
- 17″ x 17″ x Stainless Steel Platform
- User Manual
- 120V Power Cord
- 30-Day Warranty
Please Note: This listing is for an unused IKA Shaker that’s been fully tested by our service team with a clean bill of health.
Notes
Notes
Technical Notes
This IKA Reciprocating Shaker HS 501 is in excellent working condition and has been tested to meet factory specifications. All our lab equipment comes backed with our 30-day warranty.
Any thermometers, gas supply tanks, regulators, or data-loggers seen in our photos are not included unless otherwise noted in the listing. These are our testing tools to show buyer(s) the instrument is working properly up to manufacturer specification and has been tested by our service department.
Should you have any questions, please don’t hesitate to contact us.
Video
Video
IKA Reciprocating Lab Shaker HS 501 Video
IKA Reciprocating Shaker HS 501 ID 13152