- Description
- Specifications
- Included
- Notes
- Video
Description
Description
Panasonic CO2 Incubator MCO-19
The Panasonic MCO-19 C02 Direct Heat Incubators provide users with a highly regulated cell culture solution, with built-in decontamination methods and fast turnaround times. The interior features sturdy construction and a smooth stainless copper alloy antibacterial interior for preventative contamination control.
This lab incubator is microprocessor-controlled, allowing users to set their temperatures quickly, 5°C above ambient to 50°C, and CO2 levels between 0% and 20%, as well as set their alarm parameters for temperature and CO2 levels. The 19M model is a multigas incubator with a separate setting for O2 control.
This air-jacketed incubator also features natural convection and radiant wall heat for accurate and uniform distribution with a high degree of control. The reservoir controls the humidity levels, and the heater situated in the door helps prevent condensation for a clear view and fast recovery times. These incubators have been stacked to maximize floor space in the lab, doubling your capacity.
Please note that MCO-19AIC (UV) models feature a Safe Cell UV decontamination routine for added sterilization.
Specifications
Specifications
Sanyo C02 Direct Heat Incubator Specifications:
| Volume | 170 L / 6.00 cu ft (MCO-19A)
or 162 L (5.72 cu.ft) (MCO-19M) |
| Internal Dimensions | 19x17x26” |
| Temperature: | Ambient temperature +5°C-50°C |
| Uniformity | ±0.25°C |
| Temperature variation | ±0.1°C |
| Internal humidity | 95±5%RH |
| Internal humidity recovery period | 30 minutes or less |
| CO2 range | 0-20% |
| CO2 level distribution range | ± 0.15% (ambient temperature: 25o C, setting: 37o C, CO2: 5%, O2: 5%, no load) |
| Tri Gas Model Only | |
| O2 Control Range | 1 to 18% and 22 to 80% |
| O2 variation | ± 0.2% (ambient temperature: 25o C, setting: 37o C, CO2: 5%, O2: 5%, no load) |
| Noise Level | 30 dBA |
| External Dimensions | 25x29x76″ |
| Weight | 210 lbs |
| Power | 110-120V, 50/60 Hz, 2.8A, 350W (MCO-19A)
or 110-120v, 60hz, 3.1a, 354W (MCO-19M) |
Included
Included
Included with this Sanyo CO2 Incubator
Please see individual SKU ID’s for a complete list of included items.
Notes
Notes
Technical Notes
Please Note: CO2 Supply tank with Regulator and Orange Datalogger seen in photos is not included. This is our testing equipment to demonstrate a fully working and validated system. All of our lab equipment comes backed by our standard warranty. Should you have any questions, please don’t hesitate to contact us.
Video
Video
Sanyo MCO-19AIC Video
ID 24602
Panasonic CO2 Incubator ID 24602
ID 24601
Panasonic Tri-Gas Incubator ID 24601
