YSI 2950D Biochemistry Analyzer

$6,199

SKU: ysi analyzer Category:
View Quote List

Description

YSI Biochemistry Analyzer 2950D3

The YSI Biochemistry Analyzer 2950D3 is a modular metabolite analyzer configured to measure up to six chemistries through multiple immobilized enzyme biosensors and an integrated ISE module. Supported measurements can include glucose, lactate, glutamine, glutamate, and other compatible analytes based on the installed sensors, membranes, buffers, and calibrators. Results are available in approximately one minute with limited sample preparation.

Automated fluid handling allows the YSI 2950D3 to process individual samples and compatible 96-well plates. The sipper needle can pierce sealed plate films, while the internal fluidics handle samples with higher cell densities and help reduce line blockage during repeated analysis. These capabilities support metabolite monitoring in bioprocessing, fermentation, food and beverage testing, sports physiology research, and other applications requiring frequent chemistry measurements.

A graphics-based touchscreen provides access to methods, calibration procedures, maintenance functions, and stored results. Data can be transferred through USB, sent across a network, or retained in the searchable onboard database. The YSI Biochemistry Analyzer also supports communication with compatible OPC servers and laboratory data systems. This listing is specifically for the 2950D3 configuration with six-chemistry capacity and integrated ISE analysis.

Condition and testing: The pumps were primed and tested for liquid dispensing, including the sipper pump. All three stir motors were verified, the probes responded during evaluation, the sipper head positions were calibrated, and the fluid lines were cleaned. Working sensors have been paired with the analyzer. Final calibration should be completed after installation using the required laboratory methods and standards.

Operating requirements:This system requires user-supplied membranes, buffers, and calibrators based on the specific analytes required. These items are not included. Please consult the user manual.

YSI Analyser 2900 Series Specifications:

Aspirated Sample Volume User-defined from 10 to 50 ΞΌl
Analysis Time 60 seconds
Precision Application-specific, typical CV <2%
Linearity +/- 5% Cal value to maximum
Working Environment 15 to 35Β° C ambient temperature, 10 to 75% relative humidity (noncondensing)
Β Automation Up to 96 samples
Dimensions 15x21x22”
Weight 46 lbs
Power Requirements 100-120 VAC or 220-240 VAC, 50-60 Hz, 50 Watts nominal

Included with this Biochemistry Analyzer

Please refer to the individual SKU IDs for a complete list of included items.

Technical Notes

During incoming inspection and preventive maintenance, our technician performed a functional test of the pumps and fluidic system. All pumps were primed and used to dispense liquid, the sipper pump was exercised, and all three stir motors were checked for proper operation. The measurement probes were verified to respond with changing values under test conditions; however, final calibration with your own standards and methods is recommended after installation.

The fluid lines were cleaned, the sipper head positions were calibrated, and the analyzer has been matched with working sensors. No operational issues were observed during these checks. As with all instruments from The Lab World Group, this unit is carefully packed for shipment and backed by our standard 30-day warranty and responsive customer support.

YSI 2900 Series Biochemistry Analyzer – Demo Video

ID 25894–25895

YSI Analyser 2950D Biochemistry Analyzer ID 25895