SciLog Chemtec Metering System / Peristaltic Pump with Tandem Head
- EQUIPMENT DESCRIPTION
The SciLog ChemTec Metering System is a robust Peristaltic Pump used a for a wide range of applications including Bioreactor and Fermenter Feeding. The Metering System includes built-in hardware and software to optimize and automate your setup. The ChemTec pump regulates feed and flow rate that’s been preset by the user while documenting metering by volume or rate. The SciLog ChemTec Peristaltic Pump can monitor pH, or Biomass through an external IO port located on the rear of the metering system.
Another feature includes pressure control and monitoring of your process through the three RJ45 pressure connections. Use disposable pressure sensors when monitoring with a range of zero to sixty PSI. This feed metering system includes a Piggyback Tandem Easy Load II heads, for maximizing your flow. The ChemTec Peristaltic Pump has a couple of programmable modes such Tandem which is user defined by volume or weight, Feed and Bleed for maintaining constant reaction volume and Mass-Flow Feed. Contact us today to learn more about our SciLog ChemTec Peristaltic Pump.
SciLog ChemTec Metering System Specifications:
Pressure Range Tandem Head Pump
45 max psi
Resolution 0.1 psi, choice of Bar, psi or kpa
Calibrated pressure 0-60 psi, accommodates SciLog Disposable pressure sensors
100 pulses per motor resolution for 600 RPM Motor
120 pulses per motor resolution for 8 and 160 RPM Motor. And 450 and 3400 RPM
4-40°C, 100% Humidity
1) First serial port labeled “Balance”, Male DB9 connector for hook-up of electronic scale. 2) Second Serial Port labeled "Printer", Female DB9; also used to interface to PC for data storage in an Excel® file in your PC. 3) External I/O port, Female DB37 connector; Used for remote On/Off control of ChemTec™ via footswitch. 4) Pressure Box: Phone plugs for three(3) optional pressure sensors.
Membrane keyboard with auditory feedback.
23” x 6” x 9”
115/220-240VAC, 60/50 hz, 75 Watts
- Scilogic Chemtec Peristaltic Pump with Easy-Load II Tandem Head
- Four Pump Heads
- 120V Power Cord
- 30-Day Warranty
This SciLog ChemTec Metering System has been fully inspected and is operating without issue. All of our lab equipment comes backed with our standard warranty. Should you have any questions, please don't hesitate to contact us.